ODM/OEM Combo Wimax WiFi GSM  Antenna Manufacturer
Home  /  About Us  /  Customized Antennas  /  Exhibition  /  FAQ  /  Our Partners  /  Contact Us
 

ODM/OEM RF Antenna

Frequency

    174~240MHz
    460~860MHz
    156~164MHz
    340MHz
    400MHz
    433MHz
    850MHz
    900MHz
    915MHz
    1800MHz
    1900MHz
    1575MHz
    2.4GHz
    3.3GHz
    2.4G+ 5GHz
    5GHz
    5.2GHz
    5.8GHz
    704~2620MHz

Applications

    VHF
    DVBT
    UHF
    GSM
    GPRS
    GPS
    GLONASS
    WiFi
    BT
    Zigbee
    Wlan Omni
    LTE
    ISM
    WCDMA
    AIS
    Iridium
    WiMax
    EVDO

Combo Antenna

    GPS+GSM
    GPS+LTE
    GPS+WLAN
    GPS+GSM+WLAN

Repeater

 

   Dual-band GPS&GLONASS Signal Re-radiating up to 30-meter re-radiating range

 

RK-306






 
 
Frequency : General: L1 frequency, 1575.42 MHz +/-1.023 MHz and Glonass 1602 +/-8MHz

More Spec :

Dimensions:
Antenna: 4.5 in diameter & 2.9 in height
Ceramic patch re-radiator: 85mm (L) x 80mm (W) x 88mm (H)
Regulator: 65mm (L) x 32mm (W) x 43mm (H)
Weight:
Antenna: 210g
Ceramic patch re-radiator:181g
Regulator: 85g
Cable Length: 40m RG-58 A/U
Polarization: R.H.C.P.
Absolute Gain @ Zenith: +5 dBi typically
Gain @ 10 Elevation: -5 dBi typically
Gain: 27 dB typically
Bandwidth: 2 MHz min.
Noise Figure: 2.0 max.
Axial Ratio: 3dB max.
Out of Band Attenuation: 20 dB min. @ Fo +/- 50Mhz
VSWR: 2.0 max.
Output Impedance: 50 ohm
Re-radiating Range: 30m
Supply Voltage: 100~240V AC to 7.5V DC Regulator
Power Consumption: 48mA (+/- 5%) @ 7.5V DC
Operating Temperature: 30C to +80C
Storage Temperature: 40C to +85C
Operating Humidity: 95% RH, non-condensing

 
 
 

  

Overview

RK-306 is a complete GPS/GLONASS re-radiating system with dual antennas to re-transmit real-time GPS&Glonass satellite outdoor reception to an indoor environment. The system kits include a high gain external GPS/GLONASS antenna, a precisely calibrated amplifier circuit with ceramic patch re-radiator, and a built-in power supply regulator. The ceramic patch re-radiator allows multiple GPS/GLONASS receivers perform on-the-fly receiver performance within a closed environment, while the main GPS/GLONASS antenna is located on an unmanned outdoor location. The input signal power at the receiving antenna is approximately -130dBm (spreading over 2 MHz), so the desire signal is below the thermal noise floor. The whole system is designed as PNP (Plug-and-Play) hardware and it can be installed either temporarily or permanently to a secured location by using whether dashboard suction cup or screws.


 

Features:

  • Compact size/low cost/high performance
  • Polycarbonate radome with fully waterproof at IP66 rating
  • Permanently screw mount/dashboard suction cups
  • One external re-radiator for multiple, different GPS receivers
  • Real-time GPS satellites outdoor reception to an indoor environment
  • Cable length as long as 40m RF cable
  • Idea for GPS lab/GPS retail store/GPS production line/ GPS repair service
  • Re-radiating range as long as 30m

 

 Applications

  • GPS Labs
  • GPS Retail Stores
  • GPS Production Line
  • GPS Repair Service
  • GPS Signal Reception in Underground Garage


 Booth : Hall 4-339

Home  |  About Us  |  Customized Antennas  |  Exhibition  |  FAQ  |  Our Partners  |  Contact Us
(23678)11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel:886-2-2269-4456  Fax:886-2-2269-4451
Email:etek@etek.com.tw
Copyright © 2011 ETEK Antennas All rights reserved